Water heater guides
What to look for, what your options are, and what’s different about water heaters in the Jacksonville area.
Warning signs of a failing water heater
- Age. Most tank heaters last 8 to 12 years. Past that, plan for a replacement.
- Rusty hot water. If only the hot side is discolored, the inside of the tank may be corroding.
- Noise. Popping and rumbling usually mean sediment buildup.
- Moisture at the base. Check whether it’s a fitting, the relief valve, or the tank itself.
- Less hot water. Often a failed element on electric tanks, or sediment taking up space.
Repair or replace?
A simple rule of thumb: if the tank is leaking, replace it. If it isn’t, look at age and the cost of the repair. A failed element or thermocouple on a five-year-old heater is an easy repair. A failed gas control valve on a 12-year-old tank usually isn’t worth the money, because something else is likely to fail soon.
Tank or tankless?
A tank heater is cheaper to buy and install and is simple to service. A tankless heater costs more up front but uses less energy, takes less space, and doesn’t run out the way a tank does. The deciding factors are usually your gas line size, venting options, and electrical capacity. More on tankless.
Heat pump water heaters are a third option. They look like a tank but use much less electricity, and they suit garages and utility rooms with space around them.
Choosing the right size
Size a tank for the busiest hour of your day, not for the number of bathrooms. Roughly: one or two people are often fine with 30 to 40 gallons, three or four people usually want about 50, and larger households may need more or a tankless unit. The first-hour rating on the yellow EnergyGuide label tells you how much hot water a tank can deliver in an hour.
Jacksonville-area water and weather
Water in Jacksonville and across Onslow County comes from groundwater, whether from the city, ONWASA, a town system, or a private well. Groundwater here naturally carries minerals, and local supplies have dealt with iron and hydrogen sulfide. That makes sediment buildup common. Annual flushing and periodic anode rod checks are the two best things you can do for your tank.
On the coast, salt air and humidity wear on burners, vents, and fittings, especially on heaters in garages or under raised homes. And after a hurricane, any heater that sat in floodwater should be inspected before you turn it back on.
For local details, see the pages for Swansboro,Sneads Ferry,Richlands, and our otherservice areas.
Need hot water back?
Call for a free estimate. No obligation, and you’ll talk to someone local.